What You Need to Know About the Merits of Water Jet
Today when people are cutting g metals one of the most common method they prefer is that of water jet cutting. In order for one to be able to cut a metal when using this method, one usually uses a high beam of water jet. When one is cutting soft materials a water jet alone is usually enough however if there are hard metal abrasives are usually added. The main reason why some abrasive is usually added when cutting hard metals, it to add the cutting power of the water the jet. When one decides to use water jet cutting method when cutting metals there are various gains that one gets. In this article we are going to pay attention to the various gains of using CNC water jet cutting method.
When using a CNC water jet its usually easy for one to cut almost all kind of materials. When one uses other methods of cutting metals it might not be easy since the metal have differing degrees of hardness. The water jet usually contain an added layer of abrasives that usually make it quite easy for it to cut almost all kind of metals.
One of the merit of using the water jet when cutting metals is that they usually no generation of neat affected zone. In most cases when using the water jet cutting method there is usually not heat produced that could lead to heat affected areas since the method is usually a cold one. The fact that there is no heat that is usually generated when cutting metals it also makes sure that one is safe from getting burned.
Being able to avoid the distortion of the metal during the cutting process is usually quite possible if one uses the water jet. In most cases most of the other method that are used in cutting metals usually generate heat hence distorting the metals. CNC water jet usually uses a cold beam hence making sure that the materials don’t get distorted .
When one goes ahead to use the water jet cutting method it becomes quite easy for one to avoid any generation of hazardous waste. In most cases when one is using the water jet cutting method there are usually no any gases or fumes that are usually generated something that makes it environmental friendly. When one goes ahead to use water jet cutting method one does not usually have to add some additional finishing processes. The main thing that makes sure that are not additional finishes that are usually needed after using a water jet is its accurate cutting.
Source: have a peek here